-
StockCap heatshrink end caps
The range of StockCap heatshrink end caps is suitable for use with most common cable types including XLPE, PVC, PILC and rubber as well as jelly-filled and fibre-optic cables.
-
Weidmuller shielded metal Profibus DP connectors
Weidmuller has expanded its range of Profibus connectivity products with shielded metal Profibus DP connectors that are suitable for industrial use and in water, wastewater and general factory automation environments.
-
Helios H4 series solar power connector
The Helios H4 series solar power connector features the Radsok contact, providing the claimed highest industry current rating of 36-60 A.
-
StockCap heatshrink cable breakout boots
The StockCap range of heatshrink cable breakout boots is suitable for use with most common low-voltage cable types including XLPE, rubber and PILC cables rated up to 1.1 kV. Sizes include 2-core boots with body/core dimensions 32/8-14/3 mm and 4-core boots of 41/16-14/4, 50/17-17/4 and 70/28-25/8 mm.
-
Pepperl+Fuchs high-temperature sensor cables and cordsets
The Pepperl+Fuchs cables and cordsets for high-temperature environments are constructed of a TPE-class jacket material and a temperature-resistant conductor insulation material (ETFE). This provides temperature resistance at the jacket and at the conductor-insulation levels. They are resistant to temperature, weather, fuels, oils and abrasion.
-
Tyco Electronics Solklip grounding products
Tyco Electronics has expanded its line of Solarlok photovoltaic (PV) interconnect products with Solklip grounding products. The electrical and mechanical properties are UL compliant for PV module grounding applications.
-
Turck h-style (3-branch) and H-style (4-branch) M16 tees
The h-style (3-branch) and H-style (4-branch) M16 tees are designed to simplify and speed cable-tray wiring in comparison to hard-wired cable-tray installations. The tees are available in various configurations, including tees with a male connector on either side of the trunk line, integral connections or cable drops.
-
ConnectorTech ALS Sure-Seal rubberised connectors
Sure-Seal IP67 rubberised connectors are designed for applications that do not require a high number of mating cycles, making them suitable for automotive and industrial environments.
-
Turck M12 true torque connectors
The M12 true torque connectors may be hand-tightened to a predefined torque preventing over-tightening and can be used to easily determine whether or not a connector is properly secured. Once the proper torque has been achieved, the nut rotates freely, indicated by a clear haptic and audible signal.
-
Han-Yellock connector housing
The Han-Yellock connector housing has a split on the cable side for simple installation. The surface and add-on parts have been designed for harsh industrial requirements, such as those found in the machine construction industry, energy technology and plant construction. Operating controls are protected inside the housing and display a blocking function that offers additional safety for industrial applications.
-
Lumberg Automation PowerCinch connection system
The Lumberg Automation PowerCinch is a modular power distribution and motor control connection system for machinery applications.
-
Harting 5-pole variant crimp connector with M12 mating face
The 5-pole variant to the Harting range of low-voltage crimp connectors with the M12 mating face is available as a male and female a-coded connector version.
-
Han-Yellock connectors
The Han-Yellock connector series is an addition to the Han family of connectors that retains the core functionality but differs significantly from current size and shape formats.
-
LTW Circular II Metal Waterproof Connectors
The LTW Circular II Metal Waterproof Connectors are IP68 rated for data, signal, control and power installations in industrial automation applications.
-
Anderson Power Products APP 1x4 auxiliary connector
The Anderson Power Products APP 1x4 auxiliary connector is designed to mount into standard Anderson SBE160/320 and SBX175/350 connector housings, where the four circuits support the transmission of battery status, charge and discharge information for traction battery, fast-charge and opportunity-charge applications such as in UPS and materials handling systems.
-
Turck D-Size powerfast modular wiring system
The D-Size powerfast modular wiring system is designed to handle high current applications for machine power distribution and motor control. The complete D-Size power distribution system includes 3- and 4-pin cordsets, receptacles and tees that provide up to 600 V and 30 A. Additional components include field wireables, closure caps and a tee with an integrated cable drop eliminating the need for two separate connectors.
-
ITT Veam Power lock connectors
The ITT Veam Power lock series of connectors for high-power three-phase power applications such as lighting, generators and load banks.
-
Waterproof connectors
The Tajimi R04 connectors feature a tight waterproof mechanism that allows them to operate at a depth of up to 20 m when mated, making them suitable for installation in applications where there is exposure to extreme weather or high humidity.
-
Push-pull locking connectors
Han PushPull Power is a compact, five-pole power connector rated up to 16 A and 690 V. It is part of a comprehensive connector family available in both metal and plastic formats for deployment in signal and power transmission systems.
-
Han EE high-density industrial connector
The Han EE high-density connector module utilises Han-Quick Lock technology to enable cabling to be assembled without tools.
-
Power Products CR-SB chemical resistant connectors
The Anderson Power Products CR-SB (chemical resistant) SB range of high-current, quick-disconnect power connectors was developed for industrial applications that require robust connector solutions resistant to environmental factors that commonly degrade standard products, leading to eventual failure.
-
Cable terminations and jointing kits
The JointMaster range of medium-voltage cable terminations and jointing kits is available for use in both indoor and outdoor electrical installations and applications.
-
Legrand Viking terminal block range
Designed to ensure the electrical and mechanical connection of individual electrical wires, the Legrand Viking 3 is a comprehensive screw and spring terminal block range.
-
Cabling connector
The Han Q 8/0 contact insert is now equipped with the quick-to-assemble Han-Quick Lock termination technology, in addition to the existing crimp termination technology.
-
Field termination M12 connector
The Field termination M12 connector enables the installer to choose between two different kinds of termination methods, making it adaptable to suit differing field situations and conditions. A wide range of shielded cables can be terminated onto the connector.
-
Shielded M8 cord sets
The M8 picofast cord sets are now optionally available as a completely shielded unit by connecting a braided shield directly to the coupling nut. This provides a reliable connection with 100% cable and connector shielding, which protects against electromagnetic and radiofrequency interference.
-
Lightweight connectors
Fischer Connectors has released the AluLite range of lightweight aluminium circular push pull connectors, which are significantly lighter than typical metal connectors.
-
Power and I/O interconnects
Samtec has added rugged interface products, including PowerStrip/55 high-power interconnects and AccliMate and LifeJack I/O interfaces, to its product line.
-
Allen-Bradley IEC terminal block range
The Allen-Bradley IEC terminal block range has been extended to provide increased functionality and installation flexibility, while saving panel space and set uptime.
-
RFI shielded desktop enclosure
The InterMeZo 19" desktop enclosure is based on a flexible frame work construction composed of profiles and angle connectors, allowing the quick assembly of individual sizes.
-
Broadcast connectors
Fischer Connectors has improved the design of its 1051 Triax Connector.
-
Inline connectors
Aqua Safe is a range of inline connectors made from polycarbonate and glass-filled nylon, to suit a wide range of cable sizes, together with screwed and flanged bulkhead housings, and sealing caps.
-
Minifast 19-pin industrial connector
The minifast connector line has been expanded with the addition of a 19-pin connector to address more applications.
-
Industrial connectors
The Souriau Trim Trio UTG, UTO and UTS series of circular connectors are constructed from metal and/or plastic and have IP ratings from IP65 to a very high IP69K and current ratings up to 13 A.
© 2012 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our
Terms and Conditions
and
Privacy Policy.