Products
(Displaying 3 of 21)
The City Light Plus LED from Siteco uses LED technology to produce a post-top luminaire with a 39 W power consumption and 50,000 h LED lamp life.
(+)
The DL20 from Siteco luminaire uses 24x 1 W LED modules, each with a 50,000 h lamp life, positioned within a luminaire ring under the top canopy, maximising output and minimising obtrusive glare.
(+)
The Siteco A2 Midi LED outdoor luminaire incorporates 84 LEDs which provide 50,000 h lamp life and reduce maintenance. The luminaire is suitable for outdoor lighting applications with a total power consumption of 103 W.
(+)
Products
(Displaying 21 of 21)
The City Light Plus LED from Siteco uses LED technology to produce a post-top luminaire with a 39 W power consumption and 50,000 h LED lamp life.
(+)
The DL20 from Siteco luminaire uses 24x 1 W LED modules, each with a 50,000 h lamp life, positioned within a luminaire ring under the top canopy, maximising output and minimising obtrusive glare.
(+)
The Siteco A2 Midi LED outdoor luminaire incorporates 84 LEDs which provide 50,000 h lamp life and reduce maintenance. The luminaire is suitable for outdoor lighting applications with a total power consumption of 103 W.
(+)
The Aqua LED accent luminaire range has three sizes available - minor, midi and maxi - and provides a wide array of lumen packages along with multiple beam widths.
(+)
Using light emitting plasma (LEP) lamping technology, the Cardinal LEP Highbay is suitable to replace existing HID lamp technology in a variety of applications.
(+)
The City Light Bollard LED range consists of a 39 W LED module providing a 50,000 h LED lamp life.
(+)
The DL 10 LED outdoor luminaire series from Siteco, with its white high-powered LED modules, is suitable for urban, town centre, pedestrian and roadway lighting applications and its 50,000 h lamp life reduces maintenance.
(+)
The Alto LED downlight incorporates 16 high-output 2 W LED modules and features 50,000 h LED lamp life.
(+)
The City Light Elegance LED has restyled the classic form of traditional lantern and redesigned it into a contemporary post-top luminaire. It features a domed, circular aluminium canopy and incorporates a 39 W module, with a 50,000 h LED lamp life.
(+)
The CMI Superia Retrofit ceramic arctube metal halide lamp is designed to operate on existing conventional mercury vapour ballasted fixtures without the introduction of an igniter or ballast change, as is required with other metal halide lamps.
(+)
Sylvania Lighting Australasia, in partnership with Italian lighting manufacturer Ghidini, has launched a contemporary range of exterior architectural lighting.
(+)
The range of Mini Lynx Twister T2 Compact Fluorescent lamps that are compliant with AS/NZS 4847.2:2009 (MEPS) has been released.
(+)
The SlimLite miniature lighting fixtures are lightweight and compact, offer increased lighting opportunities and are suitable for art galleries, museums, foyers, offices, hotels, cafes, restaurants, meeting rooms, cabinetry details and retail applications.
(+)
The Suburban Eco lighting series can be used for cost-efficient, environmentally friendly street lighting.
(+)
Fertiliser and housing insulation are two of the by-products produced through Sylvania Lighting’s SYLrecycle lamp recycling program. The program provides a safe and environmentally friendly lamp recycling process.
(+)
The Briteline T8 series floodlights are designed for reliable performance in Australasian conditions.
(+)
The UrbanWhite system from Sylvania Lighting consists of a ceramic metal halide lamp range that is run on electronic control gear. Combining high efficacies of up to 118 lm/W with compact size, the system gives optimised optical performance in the luminaire, providing a suitable white light solution for outdoor applications.
(+)
The Siteco R2 Maxi is a high-performance roto-symmetrical floodlight that utilises five beam widths from narrow to wide. Suitable for 1000 and 2000 W short-arc metal halide lamps, the fitting is intended for use in large-area lighting applications, such as sports stadiums.
(+)
The Siteco reflectors NJ350 and 360 are high-bay luminaires optimised for standard industrial use. With numerous reflectors for narrow or wide distribution and a variety of components, the luminaires can be used in a number of applications.
(+)
The Active Reactor lighting control gear is a device for the efficient control and operation of high intensity discharge (HID) lamps. Using a microchip and electronics, the device controls HID lamps in a pre-programmed manner.
(+)
The Hi-Spot ES50 LED is designed to be a high-efficiency, direct replacement for tungsten halogen mains voltage GU10 lamps.
(+)
Articles
(Displaying 2 of 2)
In production and work places, potentially explosive atmospheres can develop wherever flammable gases, vapours or dusts are mixed with the oxygen contained in the air.
(+)
Industrial environments can pose significant challenges to the safety and effective operation of lighting systems. Luminaire selection and system design must meet performance goals where mechanical strength, weight, thermal, electrical, corrosion resistance, hazardous environment and water and dust ingress requirements must be considered. Designers must gain a firm understanding of all environmental factors that can cause system failures to deliver ‘environmental compatibility’ of lighting.
(+)
Articles
(Displaying 2 of 2)
In production and work places, potentially explosive atmospheres can develop wherever flammable gases, vapours or dusts are mixed with the oxygen contained in the air.
(+)
Industrial environments can pose significant challenges to the safety and effective operation of lighting systems. Luminaire selection and system design must meet performance goals where mechanical strength, weight, thermal, electrical, corrosion resistance, hazardous environment and water and dust ingress requirements must be considered. Designers must gain a firm understanding of all environmental factors that can cause system failures to deliver ‘environmental compatibility’ of lighting.
(+)
