Products
(Displaying 42 of 42)
Available to rent, the Hioki 3196 power quality analyser can, with simple one-button operation, record voltage, current, pf, f(Hz), kVA, kVAr, kW, harmonics (THD and individual to 50th order) and flicker (IEC6100-4-15).
(+)
The BW Technologies GasAlertMicroClip confined space 4-gas detector has been added to the TechRentals test and measurement rental fleet.
(+)
The Megger OTS80PB transformer oil tester monitors and maintains oil quality. This measurement indicates the presence or absence of contaminants such as water or conducting particles.
(+)
Available to rent, the Exfo FTB-860G NetBlazer 10G ethernet tester allows field technicians to perform RFC 2544 measurements and EtherSAM (ITU-T Y.156sam) for turnkey deployment, validation and troubleshooting of 10 Gbps access and metro ethernet services with ease in any environment.
(+)
Available to rent, the Megger DLRO wind turbine lightning protection test lead set measures the resistance of a lightning protection circuit between the wind turbine blades and the ground when used with the Megger Digital Low Resistance Ohmmeter.
(+)
Available to rent, the HV Diagnostics HVA TD60 portable tan delta measurement system determines the power factor of cables, transformers, capacitors, rotating machines and other switchgear, allowing detection of insulation defects prior to failure in service.
(+)
Available to rent, the Megger DLRO 600 digital microhmmeter measures resistance between 0.1 µΩ and 1 Ω at high currents and provides test currents from 10 to 600 A subject to the load resistance and supply voltage.
(+)
Available to rent, the Omicron CMC256-6 EP Advanced Protection Relay Test System verifies the working condition of secondary protection relay systems.
(+)
Available to rent, the HV Diagnostics Hipot insulation tester 30 kVDC and VLF is used for testing of solid dielectric cables such as XLPE and EPR and performs automatic and integrated load capacitance measurement with optimum frequency selection.
(+)
Available to rent, the Megger TDR 2000 cable fault locator can be used to identify and locate a wide range of faults on metallic cables.
(+)
Available to rent, the FLIR E60 infrared user-friendly thermal image camera can locate issues with electrical equipment, identify faults in circuits and aid in research and development or predictive maintenance identification.
(+)
Available to rent, the Megger three-phase transformer tester is a stand-alone or remote-controlled transformer turns ratio test set that measures ratio, phase deviation and exciting current with accuracy.
(+)
Available to rent, the CHK PM35 power quality analyser/logger is a portable power logger and disturbance analyser, supporting harmonic analysis as well as flicker and imbalance monitoring.
(+)
Available to rent, the Dranetz-BMI Power Xplorer PX5 accurately captures low-medium-high frequency transients through peak, waveshape, rms duration and adaptive high-speed sampling.
(+)
Available to rent, the Vivax VLOCPRO cable location system is a highly accurate pipe and cable location system. It has an intuitive menu system for easy configuration of the features users require.
(+)
Available to rent, the Megger DLRO200 is a digital low resistance ohmmeter that measures resistances between 0.1 µΩ and 1 Ω at high currents.
(+)
Available to rent, the Fluke VR1710 single-phase power quality analyser records RMS, transients, flicker and harmonics up to the 32nd harmonic.
(+)
Available to rent, the Wohler VIS340 service camera visual inspection system can be used for inspecting drainage pipes, air ducts and intermediate ceilings, to view any potential issues.
(+)
The Megger DLRO 10X digital microhmmeter, suitable for low resistance measurement, is fully automated and selects the most suitable test current up to 10 A DC to measure resistance from 0.1 µΩ to 2000 Ω, on one of seven ranges. It is available to rent.
(+)
Available to rent, the Megger transformer ohmmeter/winding resistance and tap-charger test set has dual independent channels for simultaneous measurements on two windings. It also has built-in safety discharge and shutdown features and test operation of on-load tap-chargers.
(+)
The Fluke 2042 professional general-purpose cable locator is now available to rent. It is suitable for tracing cables in walls and underground, locating interruptions, fuses/breakers on final circuits and for tracing metallic water and heating pipes.
(+)
The Fluke Ti32 thermal imager is suitable for use in troubleshooting and maintenance. It can be used for a wide range of electrical applications such as switch gear, panels, controls, fuses, transformers, receptacles, lighting, conductors, overhead buss work and motor control centres.
(+)
The Omicron CPC 100 protection relay testing system, now available for rent, is a suitable instrument for automated testing of power transformers, current transformers (CTs) and voltage transformers (VTs) and resistance testing.
(+)
TechRentals has introduced the SebaKMT Ground Penetrating Radar (GPR) into their extensive test and measurement rental fleet.
(+)
The GridSense CHK PM45 power quality analyser is said to offer comprehensive and reliable monitoring of up to CAT IV 600 V circuits and is available for rent from TechRentals.
(+)
Megger's TTR 310 Three-Phase Transformer Turns Ratio Test Set is designed to measure the turns ratio of power, instrument and distribution transformers in a substation or manufacturing environment.
(+)
The HVA 60 universal high-voltage insulation dielectrics test set is capable of finding weak cables by deploying a variable frequency VLF output.
(+)
The handheld Megger DET20C ground resistance clamp tester can be used to test lightning arrestors to verify their condition to successfully dissipate the energy from a lightning strike.
(+)
The Narda NBM-550 broadband field meter measures the field strength of non-ionising radiation from various transmission facilities, such as mobile phone and broadcast towers, to determine radiation exposure to nearby workers and the general public.
(+)
Lightweight and compact, the CMC256 claims to be the most powerful solution in the field of secondary injection testing. The CMC 256-6 is available with the EP (Extended Precision) hardware option.
(+)
The Fluke 1625/1623 earth ground testers can perform all four types of earth ground measurement.
(+)
The Testo 880-3 is a thermal imager that uses infrared radiation which can visualise defective insulation, thermal bridges, building defects and damage, as its temperature resolution is less than 0.1 °C, so that even the smallest temperature can be seen.
(+)
The Hioki 8826 measures 32 analog and logic signals simultaneously. It is used to acquire data. This can include monitoring electric signals, detecting ground fault, recording short loss of power, testing load shutdowns in power plants or for general R&D or manufacturing applications.
(+)
The palm-sized Hioki Memory HiCORDER 8870-20 is suitable for AC/DC waveform measurements, fault finding and testing.
(+)
The Omicron CPC 100 primary test set is a compact, lightweight instrument capable of testing a wide range of substation equipment, automatically creating customised reports.
(+)
The 3-phase PowerGuide 4400 advanced power monitoring instrument incorporates a colour touch screen into its lightweight design and is equipped with eight independent channels.
(+)
An advanced four-phase dynamic automatic protection relay test system, the Omicron CMC range is a universal system suitable for testing old and new generation relays, energy meters and transducers.
(+)
The Megger S1-552 high-current 5 kV insulation resistance tester is designed to test high-voltage electrical equipment, assisting electricians with the testing and maintenance of high-voltage electrical equipment.
(+)
The Hioki 3169-21 Power HiTester is a handheld clamp-on device to test and analyse electrical circuits.
(+)
Need to test high-voltage electrical equipment? The 5 kV insulation resistance testers from Megger are designed to assist electricians with the testing and maintenance of high-voltage electrical equipment.
(+)
Need to test and analyse electrical circuits? A popular electrician’s choice is the Hioki 3169-21 Power HiTester; functionality and safety packed into a handheld clamp-on unit.
(+)
The Fluke Ti25 is a high-performance, radiometric infrared camera for troubleshooting electrical installations, electromechanical equipment, process equipment and HVAC/R equipment.
(+)
Articles
(Displaying 1 of 1)
Measuring low resistance is an important electrical test because it helps identify components where the resistance has exceeded acceptable values, threatening several potential negative outcomes. These could include overheating, energy loss, protective fault device malfunction, poor grounding and catastrophic failure during power surges. Test results can be used to identify changes caused by fatigue, corrosion, vibration, temperature or other conditions that may occur at the site.
(+)
Articles
(Displaying 1 of 1)
Measuring low resistance is an important electrical test because it helps identify components where the resistance has exceeded acceptable values, threatening several potential negative outcomes. These could include overheating, energy loss, protective fault device malfunction, poor grounding and catastrophic failure during power surges. Test results can be used to identify changes caused by fatigue, corrosion, vibration, temperature or other conditions that may occur at the site.
(+)
