Products
(Displaying 49 of 49)
The Fluke 434 and 435 Series II energy analysers calculate the cost of energy loss, enabling users to identify problem areas and implement appropriate solutions.
(+)
The Fluke 430 Series II three-phase power quality analyser uses an algorithm to measure energy waste and quantify its cost. This Unified Power function enables users to quantify the energy wasted by harmonics and unbalance; the user can calculate the c...
(+)
The Compass for Pressure version 4.0 software is a universal platform for all pressure calibration software needs. From piston gauges calibrating individual devices in the calibration lab to transfer standards characterising racks of sensors in product...
(+)
The ScopeMeter 190 Series II 2-channel handheld portable oscilloscopes combine the power of a 2-channel oscilloscope with a 5000 count digital multimeter and paperless recording modes. The 2-channel models join the recently introduced 4-channel ScopeMe...
(+)
The TL175 TwistGuard test leads feature a manually adjustable tip guard for use in different measurement environments. By simply twisting the test lead, the user can change the exposed probe tip length. When the guard is retracted, the TL175 Test Leads...
(+)
The 434/PWR power quality analyser can be used to conduct energy consumption studies and electrical load analysis, and to perform power quality logging and analysis surveys. The instrument helps electricians, field service engineers and maintenance tec...
(+)
The P3 series thermal imagers add four additional products providing high-performance imagers for any budget. All models are specifically designed to work in even the harshest environments and provide good image quality with one-handed, easy-to-use int...
(+)
Fluke has launched TL175 TwistGuard test leads with a manually adjustable test tip guard for use in changing measurement situations.
(+)
The Ti27, TiR27 and TiR29 thermal imagers have been added to the Fluke P3 series that features thermal sensitivity and spatial resolution combined with a high-definition display.
(+)
The rugged Ti9 electrical/thermal imager can be used to detect problems in a wide range of equipment including switchgear, motor control centres and lighting systems. It can also be used to extend equipment lifetime, avoid electrical fires, and validat...
(+)
The 2AC VoltAlert AC non-contact tester detects voltage and is claimed to provide safer, faster working conditions. The tester detects energised circuits and defective grounds, making it suitable as a first-line go/no-go tester for an electrician.
(+)
The 5522A multiproduct calibrator is durable enough to be safely transported for on-site or mobile calibration of a wide variety of electronic test tools and is suitable for engineers, technicians and lab managers.
(+)
The Stik thermometer from Fluke Calibration is a suitable substitute for precision mercury- or spirit-filled glass thermometers. The RTD probe and thermometer readout are combined into one unit and calibrated as a system.
(+)
The Fluke 233 digital multimeter is claimed to be the first digital multimeter with a detachable wireless display.
(+)
The 1555 and redesigned 1550C insulation resistance testers are designed for a wide range of diagnostic and predictive maintenance programs.
(+)
The 421D laser distance meter is a distance measurement device with features that include audible feedback for taking room angle and incremental measurements, a ±45° tilt sensor for taking indirect measurements in hard-to-reach areas and enha...
(+)
The Fluke 27 II and 28 II digital multimeters, suitable for operating in harsh conditions, are IP67 rated for water and dust resistance and offer an extended operating temperature range of -15 to +55°C.
(+)
The 1594A/1595A Super-Thermometers from Hart Scientific can be used for calibration of SPRTs, PRTs and thermistors.
(+)
The CLKTO C-range infrared window is designed to facilitate infrared and visual inspections of indoor switchgear and electrical installations, while protecting technicians from arc-flash or electric shock.
(+)
The 2AC has been added to the VoltAlert AC non-contact voltage tester range. It is easy to use and tests for energised circuits and defective grounds. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal s...
(+)
SmartView software, for the Ti32 thermal imager, is a modular suite of tools for viewing, annotating, editing and analysing infrared images. It fully supports the company’s IR Fusion technology and upgrades are complimentary for the life of the p...
(+)
The 1650B series installation tester provides two measurements at once and a dual display. PEFC/PSC and loop impedance are measured and displayed in parallel, which is claimed to save more than 50% of test time compared to other loop testers.
(+)
The ScopeMeter 190 series II, the claimed first 4-channel portable scope safety rated to CAT III 1000 V/CAT IV 600 V, combines performance, ruggedness and portability.
(+)
The ScopeMeter 190 Series II handheld portable oscilloscopes are claimed to be the first four-channel scopes suitable for harsh industrial environments and safety rated for CAT III 1000V/CAT IV 600 V environments.
(+)
The Fluke range of clamp meters is designed to meet requirements for testing and maintaining electrical systems, industrial equipment, and commercial and industrial HVAC equipment.
(+)
The 5080A multiproduct calibrator accurately calibrates both analog and digital test instruments including analog meters, panel meters, digital multimeters, watt meters and, with optional accessories, clamp meters, megohmmeters and oscilloscopes to 200...
(+)
The Fluke 6105A and 6100B electrical power standards are designed to deliver stable, precise reference power and energy for use in calibrating electrical measurement equipment in instrument service and calibration, electrical manufacturing and power ut...
(+)
The Fluke 233 wireless remote display digital multimeter features a removable magnetic display that allows users to be 10 m away from the measurement point - helpful for difficult measurements where display viewing is challenging - using low-power wire...
(+)
The Fluke 421D laser distance meter can measure distances of up to 100 m with one push of a button and automatically stores the last 20 measurements for quick recall. It is designed for electricians, facilities managers and HVAC contractors.
(+)
The Fluke 772 and 773 milliamp clamp meters are designed to measure 4-20 mA signals without ‘breaking the loop’, enabling technicians to measure low-level DC current in PLCs and control systems, correlate process indication with real physic...
(+)
The Fluke Hawk C range of IR windows is designed to make thermography safer and complement the full range of Fluke thermal imagers including the TI25, TI40FT and TI50FT.
(+)
The Ti40FT and Ti45FT thermal imagers are designed for use in a wide variety of thermography tasks.
(+)
The enhanced Version 3.4 of FlukeView Forms provides analysis and reporting software for digital multimeters and other test instruments.
(+)
Version 2.0 of the SmartView software for Fluke thermal imagers provides 3D imaging capability and additional options to optimise and organise thermal images and create professional reports.
(+)
The ScopeMeter 225C and 215C test tools perform verification of electrical signal quality on industrial buses like Fieldbus, CANbus, Profibus and Modbus.
(+)
The ScopeMeter 225C and 215C test tools perform verification of electrical signal quality on industrial buses like Fieldbus, CANbus, Profibus and Modbus.
(+)
Version 2.0 of the SmartView software for Fluke thermal imagers provides 3D imaging capability and additional options to optimise and organise thermal images and create professional reports.
(+)
The Firmware V1.1 is a free software package to upgrade the Fluke 287 and 289 True-RMS logging multimeters with improved reporting functionalities.
(+)
The A40B precision current shunt set is a range of precision devices designed to make precision current measurements. The set comprises 14 low-inductance coaxial current shunts, adapters, connectors and a rugged transit/storage case.
(+)
The TiR1 and TiR thermal imagers are designed for use in building restoration and inspection applications.
(+)
The Hart Scientific 4180 and 4181 precision infrared calibrators are designed to ensure the optimum accuracy of temperature recorders and thermometers.
(+)
Fluke has expanded its range of thermal imagers with the addition of the Ti25 and Ti10 models, which provide comprehensive thermal imaging solutions for everyday troubleshooting and maintenance of electromechanical equipment, electrical installations, ...
(+)
The Fluke 568 and 566 digital laser thermometers are 2-in-1 IR and contact thermometers that make complex measurements easy with a simple, 3-button on-screen menu interface in six languages for quick navigation to adjust emissivity, start data logging,...
(+)
The Fluke 289 true-rms industrial logging multimeter and FlukeView Forms software have been combined to form a kit to enable users to turn logged data into graphs, tables and reports.
(+)
The 125 ScopeMeter is designed for maintenance and troubleshooting of digital networks that connect industrial plant controls often operating in harsh environments, subjected to significant temperature changes, high humidity and a variety of chemicals.
(+)
An upgraded version of InsideIR software is available as a free download to Fluke Ti20 and Ti30 thermal imager users at http://us.fluke.com/usen/support/software.
(+)
The Fluke 1621 is an earth ground tester which provides basic ground testing methods with a simple user interface and intuitive functionality. It is a basic entry-level tester that complements Fluke’s 162x range of earth ground testers.
(+)
The Fluke 287 and 289 logging multimeters with true-rms and TrendCapture are high-accuracy logging digital multimeters designed with advanced features for electrical, electronics and industrial professionals.
(+)
Fluke's family of true-rms digital multimeters is designed to meet the needs of specific trade applications.
(+)
Articles
(Displaying 2 of 4)
Productivity is the key to survival in today’s globally competitive environment. When the basic inputs to production including time, labour and materials are considered, there isn’t much room for optimisation. Organisations operate 24 hours per day, labour is costly and choice in materials is limited, which means every company must use automation to gain more output from the same inputs, or perish. Organisations that rely on automation need to ensure continuous operation.
(+)
For electrical workplace safety in Australia and New Zealand, the safe design of electrical installations and testing requires compliance with local standard AS/NZ 3000.
(+)
Articles
(Displaying 4 of 4)
Productivity is the key to survival in today’s globally competitive environment. When the basic inputs to production including time, labour and materials are considered, there isn’t much room for optimisation. Organisations operate 24 hours per day, labour is costly and choice in materials is limited, which means every company must use automation to gain more output from the same inputs, or perish. Organisations that rely on automation need to ensure continuous operation.
(+)
For electrical workplace safety in Australia and New Zealand, the safe design of electrical installations and testing requires compliance with local standard AS/NZ 3000.
(+)
A knowledge of the electrical hazard/risk categories for test equipment is essential in maintaining a safe workplace for electrical contractors and technicians.
(+)
There are literally hundreds of power quality measurements that can be taken on electrical systems and equipment. Predictive maintenance measurements and power consumption measurements can help electrical contractors uncover hidden costs for their end-user customers, protect their equipment from damaging conditions, reduce their unscheduled downtime and improve the system’s overall performance.
(+)
